Base:

The units are skid mounted on a steel frame base consisting of 100mm x 55mm M.S. I-beams, with an inner I-beam 100mm x 55mm one welded longitudinally and two or three laterally. 50mm M.S. flat bars are also welded to the external I-beam frame. Steel works are then wire brushed and painted with one coat of red oxide steel primer and one coat of Chocolate Brown gloss oil paint
The unit is set at ground level.
 

Floor:

Flooring comprises 18mm thick Commercial Plywood nailed and glued to the selected timber joists 100mm x 50mm intermediate supports, mounted into the steel base at 600mm center to center. The cabins’ room’s floors shall be lined with 0.5mm thick (or thicker) PVC PVC Sheets while wet areas are lined with GRP or PVC Sheets.
 

Walls:

External walls are sandwich panels made of timber frames, 50mm thick in total. Timber will be dried, externally faced by 4mm thick Indonesian Plywood primed and painted with a moisture and weather proof, textured Cream color paint. Internally, the walls are lined with 12.5mm thick, Gypsum boards. All walls are insulated with 42mm thick polystyrene boards. 6mm-thick plywood cover strips are glued and nailed to cover the external joints prior to painting. Internal walls are also sandwich panels of similar specifications but both sides are faced with Gypsum Boards. The internal walls are insulated by means of 42 mm layer of polystyrene boards. Wall joints are sealed with 6mm beveled strips of mdf. All panels are nailed and connected together. All Wet Areas are lined with 4mm thick moisture proof Polyester Coated Plywood.
 

Roof:

Roofs are pitched type made of wooden trusses set at 1200mm centers, nailed together and to the external wall framing by means of 100mm x 50mm timber fascia. Timber purlins are nailed to trusses top at 1200mm centers, and then covered with G.I. or Aluminum corrugated sheets of 27 gauge with capped, umbrella roof nails.
 

Ceiling:

Ceilings are 4mm thick Indonesian Plywood nailed to the timber trusses and timber frame works set between trusses at 600mm centers. Joints between ceiling sheets are hidden with 4mm plywood cover strips. Ceilings are primed and painted with a quality, textured paint.
 

Doors:

Doors generally are 40mm thick, Externally 830mm wide, and 1935mm high of semi-solid core for external and internal use, and are hung on 1½ pair of square butt hinges, and fitted with quality mortise/barrel locks. Externally, doors are primed and painted with high gloss oil paint matching the steel frames’, Internal Doors are lined with the same sheets as their corresponding walls.
 

Windows:

Windows are 95cm X 95cm, made of Aluminum section cut assembly, single glazed in two horizontal panels one fixed and one sliding, fitted with fly screen. Glazing is 4mm thick clear glass and sections are powder coated white.
 

Electrical:

British standard wires, switches, sockets, and light fittings are twin tube light without diffuser, are surface mounted. All wiring is concealed in the walls with PVC pipes. Each room is provided with at least two 13amp sockets, plus one 15amp socket with wall opening for window type A/C unit including support brackets. Weatherproof light is provided over external doors. Main distribution board contains breaker switches all of European standard and an ELCB. All fittings come with a 2yr & 5yr manufacturers Warranty.
 

Sanitary:

Standard items in bathroom are: pedestal-type wash, Western type W/C with Ablution “shattaf” hose (Italian make) and shower tray. Plumbing works are by heatwelded PPR (supply) while all drainage works are PVC. Aesthetically appealing Soap, PaperRoll, & Towel(x2) Holders are also installed along with Shelf & Mirror. UAE or Oman made water heater is included per toilet.
Kitchen is fitted with SS Sink placed on top of an Aluminum Cabinet. All Sanitary fitting are of German manufacturers unless stated otherwise.